I recently picked up an original NES Deluxe set from a garage sale for only $40. It was a complete set and in the original box with Rob the Robot! Obviously I couldn’t pass up a deal this good.
Here’s some pics of the NES Deluxe Set Box for your viewing pleasure =)
Upon returning home to test it I found that everything worked perfectly except ROB wouldn’t move up or down. I was able to fix ROB so I thought I would share some knowledge on what I did to fix the problem.
How to fix ROB
It’s much easier to fix him if you turn him upside down. This is due to the fact that ROB is filled with gears and if he’s upside down the gears will not fall out when you remove the screws that hold ROB’s torso together.
Once the ROB’s torso screws are out the inside will look like this:
When ROB can’t move up or down it’s almost always do the the front gear/axle assembly. Back in the day Nintendo glued a part of it together and over time the glue can dry out and when that happens the gears won’t turn on the axle. Below is a picture of the gear I’m talking about:
All you need to do is remove of ROB’s as well as the gears that move the arms. Next you can remove the gear/axle assembly and put super glue on the part listed in the previous pic.
It’s much easier if you prop up ROB’s arms when you put him back together. You need to make sure everything lines up otherwise you will have to take it apart again because it will not work unless it’s lined up perfectly.