How to take apart (open) the Nintendo NES-001 (Toaster) Steve, March 5, 2011 Nintendo Toaster NES It’s very easy to take apart the original toaster style Nintendo NES. You only need a standard Phillips screw driver and optionally a dental pick tool. Nintendo NES Tools Flip the NES on it’s top and remove the 6 screws from the bottom of the NES Remove the top of the NES and set the NES on it’s bottom like normal Remove the 6 screws holding on the metal shielding Nintendo NES top cover removed exposing metal cover Remove the cartridge caddy by removing the 6 screws that hold it in place. Take note that the 2 silver screws are longer and remember to put them back in the same spot. Nintendo NES with top cover removed Nintendo NES view of game cartridge caddy NES Repair remove game cartridge caddy step: a Nintendo NES remove game cartridge caddy step: b Nintendo NES View of Motherboard and 72 pin connector. Game cartridge caddy removed. Remove the last 2 screws that are located near where the power supply and component cables plug in. Now you can remove the motherboard from the NES. Nintendo NES Motherboard with 72 pin connector removed Nintendo NES Motherboard Removed Nintendo NES Repair and Modding 72 pin8 bitCleanFront loaderMotherboardNESNES-001NES001NintendoNintendo NESRepairServiceTake apartToaster
The phillips screw driver fits in the screw head, but I can not remove the screws without stripping the screws. What should I try next before causing more problems? Log in to Reply
Try using a smaller flat blade screw driver like a double 0 if you have one. If that doesn’t work you may have to drill out the screw heads or use an “Easy Out” tool if you have one. Log in to Reply
P.s. The n.e.s. worked when I got it 8 years ago and I just need to do some of the t.l.c. mentioned on this Web site because I have always wanted to play the Metriod. Log in to Reply